| Brass Domed Dolly Light switches
|
Used but Good
|
Wanted to replace the old and discoloured bakelite ones.
Must be 2” in diameter. 6 wanted in total
|
168
|
| Stem Head Fitting (brass)
|
Used but Good
|
for 19” sail boat
to take roller reef/anchor
|
169
|
| Sestrel moore compass
|
Good
|
|
179
|
| Piston ends for 2" dia spinnaker pole
|
Serviceable
|
|
180
|
| sliding gooseneck for small dinghy
|
Serviceable
|
Preferably bronze/gunmetal. Slide approx 6" x 3/4". Vertical and horizontal pivot. Boom fixing screwed through metal jaws into (wooden) boom (like Mirror Dinghy).
|
182
|
| Walker Cherub Taffrail Log deck mount
|
New/as new
|
I need to find a deck mount for a Cherub taffrail log.
|
186
|
| Stemhead fitting
|
Serviceable
|
Suitable for 17 foot ply trailer sailer (Lysander)Ideally with chain roller.
|
192
|
| round thimbles for 3/8 inch rope
|
For the enthusiast only
|
these are for some blocks we are making for our maritime museum. can be any metal, round and for 3/8 inch rope.
Also, some sheaves for 3/8 rope to mount in the blocks.should be 1 ¾ diameter with 3/8 inch hole.
|
235
|
| Bronze fore hatch
|
New/as new
|
|
236
|
| mainsail roller reefing gear
|
New/as new
|
mainsail roller reefing gear for a wooden folkboat boom.
|
240
|
| Brass Navigtion lights (Red/Green/steaming and stern)
|
Good
|
Building Edwardian launch, so fittings that are fitting. About 6-8 inchs high. Adaptable to 12 volt.
|
241
|
| Flew Through boat fitting for taylors heater
|
New/as new
|
I have a taylors diesel heater and need the last piece of the flew that go’s through the cabin roof. I will pay postage world wide, I can not seem to be able to locate one if anyone can help in any way I will be most greatfull. Thanks
|
243
|
| Walker Excelsior log Spinner(s)
|
Serviceable
|
in unbent working condition please
|
244
|
| 4” stainless steel cowl vents to fit dorade box
|
Used but Good
|
I have 4”white plastic cowl vents(2 off)and I would like to replace them with stainless or bronze cowls but with secondhand prices
|
246
|
| rowlocks
|
New/as new
|
4X s/s rowlocks with 3/8 inch shank
|
247
|
| rudder hardware
|
New/as new
|
rudder hardware for 16’ double ender
|
248
|
| cleats and brass fittings for wooden boat retoration project
|
Used but Good
|
any deck fittings conidered for an old wooden broads cruiser
|
249
|
| portholes
|
Used but Good
|
wanted for broads restoration project any deck fittings and 6 bronze or brass portholes between 4 or 5”
|
255
|
| Manual on Dockerell 17
|
Serviceable
|
Full details of design layout with particular reference to buoyancy tanks and safety.
|
263
|
| Mushroom Deck Ventilator
|
Serviceable
|
3" low type mushroom ventilator
|
267
|
| Door Knocker - Anchor shape
|
For the enthusiast only
|
Looking for a brass/bronze door knocker in the shape of an anchor, around 5" to 6" height.
|
268
|
| 'Jeffery's' seamflex No. 5029
|
New/as new
|
A waterproof seam composition to be appllied cold with a putty knife.
|
309
|
| Bronze Star
|
Serviceable
|
Looking for a cast bronze star approx. 2" to fit on the end of the bowsprit on a Pacific Seacraft Orion 27.
|
316
|
| Sails for Seagull Sloop
|
Used but Good
|
Wanted, sails for Ian Proctor Seagull 18ft 6in Bermudian Sloop
|
317
|
| Tufnol Cam Cleats for use with 4mm rope
|
|
Two sets of Tufnnol Cam Cleats for use with 4mm rope ie Cleats for 6mm would be ok
|
318
|
| Centerboard winch and small rigging screws.
|
New/as new
|
Suitable for 1935 Int. 14 Urgently required.
|
327
|
| Steering Pedistall
|
Used but Good
|
We are building a 20' steam boat we have a suitable helm but are in the market for a pedistall brass / bronze but would consider other materials
|
349
|
| small wood burner
|
Used
|
I need a really small wood burner for my vehicle. It does not need to look amazing, but must be air tight.
|
350
|
| Genoa sail white suitable for furling
|
Used but Good
|
size approx luff 3.900m to wire eyes
leech 3.700m
foot 2.060m
|
355
|
| P.W.Blandford ‘Curlew’ 9ft dinghy plans wanted
|
Good
|
Does anybody have a set of plans they could sell me, for building a “Curlew” 9ft dinghy designed by Percy Blandford. Any condition.
Thanks
|
356
|
| trailing log
|
Serviceable
|
we are looking for a trailing log that is ready to use, as we have recently purchased a traditional boat
|
357
|
| Forehatch cover for Dodnor Star Trekka wanted
|
Serviceable
|
Hatch cover wanted for a Dodnor Star Trekka
|
358
|
| Brass skylight binnacle
|
Serviceable
|
I seek the top to a brass skylight binnacle for my Alden schooner c. 1929. I have the base, byt the top was lost over time. Bas is approx 7” in dia.
|
359
|
| Large Wooden Fid
|
Serviceable
|
Wanted a large Standing or Cringle Fid - approx 24 inches length x 2 inch diameter base. for use at Sea Cadet unit for training purposes.
Other interesting sailmakers tools also considered.
|
360
|
| Brass navigation headlight for Dutch barge
|
New/as new
|
As above
|
361
|
| chain locker hatch cover for an L.M..27
|
New/as new
|
GLASS FIBER TRIANGULAR CHAIN LOCKER HATCH COVER FOR L.M.27
|
368
|
| Brass cylinder self-bailer
|
Good
|
I am restoring a wooden hulled Albacore. The self-bailer is not complete and needs replacing. They have an apporx 1” diameter.
|
369
|
